Gator Tile Polymeric Sand for Porcelain Tile Joints

The Only Joint Sand for Porcelain Tile

Gator Tile Sand is a unique mixture of polymer binders and calibrated sand available in Slate Grey.Once Gator Tile Sand sets, it becomes very firm and locks between the tile joints while still retaining flexibility and providing a long lasting, durable jointing material. Gator Tile Sand is recommended for a variety of pedestrian uses including pool decks, patios, footpaths etc.This product is for use exclusively with the Gator Tile System and Gator Base. It is not for use with porcelain tile laid directly on concrete, or directly on an aggregate or sand base or bed.

• Can be used for joints up to a maximum of 1 inch (2.5 cm) and its fine gradation allows use in even the tightest joints
• Helps prevent weeds and damage caused by burrowing insects
• Helps prevent erosion due to wind, rain, and freeze thaw cycles
• Fast setting: Product sets within one hour after application of water
• Sets at above freezing temperatures (32°F/ 0°C)
• Can be applied even if rain is expected (however, minimum of 1 hour of dry weather is needed after activation)
• Intact pallets can be stored outside

Gator Tile Sand