Adhering the Stone

03/

After trimming the stone veneer, the next step is to adhere your trimmed stone veneer to the masonry surface. Follow the steps in this video to ensure that your stone project lasts a lifetime.

Key Steps to Success

1. Prepare Your Mortar:
   • Use a high-quality mortar like Laticrete MVIS Hi-Bond Masonry Veneer Mortar, recommended by Stoneyard.
   • Mix the mortar according to the manufacturer’s instructions, ensuring a smooth, spreadable consistency.
2. Apply the Mortar:
   • Use a notched trowel to apply the mortar to your prepared wall surface in manageable sections.
   • Create a consistent layer of ridges for optimal adhesion.
3. Set the Stone:
   • Carefully press each stone onto the mortar bed, ensuring full contact.
   • Use a slight rocking motion to secure the stone in place.
4. Maintain Consistent Joints:
   • Use spacers or visual reference points to achieve uniform joint widths.
   • Regularly check the level to ensure straight installation.

Remember:

• Work in small sections to maintain control and prevent the mortar from drying too quickly.
• Take your time and pay attention to detail for a flawless finish.

Recommended Adhering Mortar

LATICRETE MVIS Hi-Bond Veneer Mortar

Laticrete MVIS Hi-Bond Veneer Mortar is a high-performance, polymer-fortified mortar designed for the installation of masonry veneer, stone, tile, and brick.

• Superior adhesion
• Suitable for both interior and exterior projects
• Weather resistant

Shop Now